Call : +1.330.488.1651Phone
info@kochknight.comEmail
Acid Proof ConstructionKNIGHT-WARE™ Acid Proof BrickThermoplastic Lining™Bonding and Sealing MortarsAcid-Proof Membranes PYROFLEX™Surface Protection MaterialsThermoplasticKNIGHT-GARD™ SystemsStructured MediaFLEXERAMIC™ Structured Ceramic MediaFLEXILITH™ Structured Ceramic MediaRandom MediaCeramic MediaEngineering & Installation ServicesTower Internals- Supports- Distributors- Mist EliminatorsRandom PackingCeramic Tower PackingPlastic Tower PackingStructured PackingFLEXERAMIC™
Structured Packing
FLEXILITH™ Structured Packing

Bonding and Sealing Mortars

  • ACIDSIL™ - 100% inorganic composition. A silicate type based acid proof mortar consisting of a liquid binder and finely divided silica filler. The mortar hardens by internal chemical action, which produces an insoluble silica gel. ACIDSIL Mortar is resistant to most acids and salts, except those containing fluorine. ACIDSIL Mortar is completely inert to all organic solvents and resistant to operating temperatures as high as 1600°F (871°C).
  • ACIDSIL™K - 100% inorganic composition. Unaffected by strong oxidizing agents, this mortar consists of a potassium silicate binder and a finely divided, silica filler. The potassium silicate binder produces a mortar with less flexing effect and eliminates the sodium carbonate bloom. The mortar hardens by internal chemical action which produces an insoluble silica gel. Not subject to crazing or growth in the joints, which produces brickwork failures and resistant to operating temperatures as high as 1600°F (871°C).
  • ACIDSIL™SR - A halogen-free silicate type mortar made with selective size graded silica fillers. The liquid binder is a two-component silicate solution designed for both reduced set time and excellent resistance to steam.
  • ACIDSIL™Z - A halogen-free silicate type mortar made with a selective size graded silica and zircon fillers. The liquid binder is a potassium silicate designed for high loading plus good workability. In steam impingement environments, the ACIDSIL Z Mortar holds up better than typical silicate mortars.
  • ACIDSIL™HT - A high-density silicate type mortar made with size-graded alumina fillers, which are extremely hard and abrasive resistant. The liquid binder is a special potassium silicate designed for high solids loading plus good workability. ACIDSIL HT is suitable for applications in service temperature up to 1800°F (982°C).
  • EPOXINITE™ - Epoxy based mortar developed for use with our KNIGHT-GARD™ Tile - (link to Surface Protection Page). Designed to work in high acid / chemical attack environments.
  • RESIBOND™D - A two-component mortar designed to provide exceptional chemical resistance, excellent strength retention at elevated temperatures, and very good resistance to oxidizing environments. The liquid binder is a vinyl-ester resin having superior resistance to solvents, acids and mild alkalies at operating temperatures up to 280°F. The resin is tightly cross-linked by the addition of RESIBOND™ Powder during the mixing of the mortar.

    The filler, RESIBOND D Powder, is a carefully selected, size graded quartz, with special additives to enhance trowel-ability and prevent “bleeding” or mortar running out of brick joints.
  • PERMANITE™ - A two-component mortar designed to provide exceptional chemical resistance, and excellent strength retention at elevated temperatures. The liquid binder, PERMANITE Resin, is a furfuryl resin that has superior resistance to solvents and acids at operating temperatures up to 375°F (191°C).

    The filler, PERMANITE Powder, is a carefully selected, size graded carbon powder with special additives to enhance trowel-ability and prevent “bleeding” or mortar running out of brick joints.
  • GLYSIL 90™ - A litharge-glycerol mortar designed for use in sulfuric acid/oxidizing environments at temperatures exceeding the limits of most organic mortars. GLYSIL 90’s strong waterproof bond gives it an advantage over silicate mortars that can “wash out” of brick joints in certain services. The litharge (lead oxide) reacts with sulfuric acid to form lead sulfate which is insoluble in sulfuric acid at concentrations less than 50%. GLYSIL 90 Mortar is a two-part system made up of GLYSIL 90 Powder and GLYSIL 90 Solution.

    The powder is carefully selected litharge plus other ingredients to control working life and set time. The solution is a high purity glycerol. Designed for sulfuric acid / oxidizing environments.
  • CORESITE™ - A specially compounded hydraulic type mortar. It is resistant to chemical attack by alkalis and salt solutions of pH 5 to 14 inclusive. Being completely inorganic, it is entirely unaffected by organic solvents. CORESITE Mortar hardens by internal chemical action at temperatures as low as 40°F. It has a long working life, yet sets rapidly to a high strength mortar. Not recommended for handling acids.
  • KABO™C - A pure resin-forming liquid in which it contains no volatile solvents. Mixture of specially compounded phenol-formaldehyde liquid resin binder with selected 100% carbon filler is carefully controlled to insure easy, uniform mixing with the filler.. It is resistant to most inorganic acids, organic acids, weak alkalies, oils, many organic solvents, water, and steam at temperatures up to 350°F (177°C). Excellent resistance to impact, abrasion, and thermal shock.
  • VET94 – A vinyl-ester resin mortar is a two-component system incorporating the catalyst uniformly in the powder, thereby eliminating the need to add catalyst at the jobsite. Designed to provide exceptional corrosion resistance in harsh pulp and paper chemical environments at both ambient and elevated temperatures. Typically unaffected by chloride stress and is highly resistant to pH extremes.
55 Drums Combo
55 Drums Combo

Resibond D Combo
Resibond D Combo

Acidsil Z Combo
Acidsil Z Combo
  ACIDSIL™ ACIDSIL™K ACIDSIL™SR ACIDSIL™Z ACIDSIL™HT
Density 116 lb/ft3
1,858 kg/m3
112 lb/ft3
1,794 kg/m3
136 lb/ft3
2,178 kg/m3
136 lb/ft3
2,178 kg/m3
147 lb/ft3
2,355 kg/m3
Bulletin M 530 A M 534 B M 550 A M 551 M 537
 
  RESIBOND™D PERMANITE™ GLYSIL 90™ CORESITE™ KABO™C VET94
Density 118 lb/ft3
1,890 kg/m3
100 lb/ft3
1,890 kg/m3
170 lb/ft3
2,790 kg/m3
105 lb/ft3
1,684 kg/m3
96 lb/ft3
1,538 kg/m3
120 lb/ft3
1,920 kg/m3
Bulletin M 519 C M 500 C M 536 C M 326 D M 349 M 538 B
Copyright © 2011 Koch Knight, LLC, All Rights ReservedSite created by Thomas Web Solutions